The Epson L350 is a cartridge-free multifunction printer. Its ink reservoir holds four ink tanks as with many other Epson inkjet printers that do away with cartridges, but there are two extra black ink bottles included in the purchase box.

As a tank-based printer, the L350 is pricier than its cartridge-based counterparts, but its lower ink cost makes it cheaper to run and therefore a lot of consumers are willing to pay more up front to be able to save on operational cost over a long term.

Features and Highlights

The width of the L350 is almost 50 cm because it has to accommodate the ink reservoir on the side, so you may want to place it on a separate table. Despite the addition of the reservoir, though, the printer is still a light one, at less than ten pounds.

Lots of Ink

The real strength of the L350 is its ink reservoir. It holds so much ink that filling it once is enough to tackle a lot of large print jobs for months. Each ink bottle that ships with the printer contains 70 ml of ink. That means you have 420 ml of ink in total. How many pages that can be printed out with this set of ink depend on the print mode you use, paper size, page margins, and page content.

Print, Scan, and Copy

Three core functions exist in the Epson L350. It can print pages as fast as 33 ppm, but its scanner is good for occasional use only as it lacks the most important component to feed paper automatically for scanning and copying. The fact that it has only flatbed limits its use significantly. Although its very basic function allows anyone to scan pages as many times as necessary, doing so would take a much longer time than using an automatic document feeder.

Ink Pad and Epson L350 Resetter

One of the advantages of having lots of ink is that you won’t have to refill the reservoir very often. While refilling it is very easy to do, it is still not the kind of a task that everyone would want to spend time on. And there is also another problem related to ink.

Not every drop of ink is used to print pages. The printer’s maintenance routines require ink consumption too, which then generate ink waste that is absorbed by its ink pad. When this pad reaches its saturation point, the printer responds every print command by popping up that “Service Required” message. It won’t print, not until you buy a new printer or use this Epson L350 Resetter.

Epson L350 Resetter Free Download

The amount of ink absorbed by the ink pad is tracked by using an internal counter. When this counter reaches the limit set by the equation that makes up the printer firmware, the error message appears. The simplest solution to this issue is by using this software, which has the capability to reset the counter so that the printer can function like before. You can click the link below to download Epson L350 Resetter for Windows: