anturis.com

Epson ET-2720 Resetter

<span class='wpmi-mlabel'>Epson ET-2720 Resetter</span>
  • Windows 7, 8, 10, 11
  • Version: ET-2720
  • Size: 4MB
  • Click to rate this post!
    [Total: 1 Average: 5]
  • Need Updated version!

The color printer Epson ET-2720 is built for home use where wireless printing is a must-have feature. It’s a compact and elegant printing device, adorned with a sleek dark color to please the eyes.

Bundled with the printer is an ink supply that can last for up to two years, allowing you to print thousands of black and color pages before a full refill is required. You’re also protected with a 12-month coverage, which can be extended to 36 months after online registration.

Features and Highlights

Epson ET-2720

Print Anytime and Anywhere

With the Epson ET-2720, you don’t have to be physically present in the same room as the wireless printer. Thanks to Epson Connect, you can use the printer from pretty much anywhere with an internet connection. Even when you’re not with your laptop, you can still send print jobs to the printer via email.

Scan and Copy Without PC

The Epson ET-2720’s control panel features a 1.44-inch LCD screen with buttons that are neatly arranged on both sides up front, allowing you to scan and copy directly from the printer. While using the PC gives you more control over scanning, sometimes it’s more practical to do it from the control panel.

Print In Color or Black and White

One quick glance at the printer is enough to tell that it operates on four ink colors. The ink tank is at the bottom front, next to where the prints exit from the printer. It has four separate windows displaying the ink level of each color, so users can immediately know when they almost run out.

15 pages per minute with an FPOT score of 16 seconds is the best speed the printer can achieve when printing in color. On the other hand, printing in black and white only can boost the speed up to 39 pages per minute, with an FPOT score of 10 seconds.

About Epson ET-2720 Resetter

Screenshot – Resetter Epson ET-2720

Being a wireless color printer relying on dye ink to produce printed pages, the Epson ET-2720 comes with several ink pads to absorb the waste ink. It stays operational as long as the ink pads are still not fully saturated with ink yet. When they do, that’s the time a counter resetting may be required if you still want to use the same printer.

This resetter can get the job done in a few minutes, or perhaps longer for first-time users since intuitiveness is not its strong suit. It runs without installation, and it’s free and lightweight.

Epson ET-2720 Resetter Free Download

Before using the resetter, you should remove the ink pads from the printer and then clean them thoroughly under running water. After slotting them back in to the printer, you can launch the utility to start the waste ink counter reset.

It takes around 1-2 minute for the utility to reset the printer, if nothing goes wrong. After that, it’s up to your decision whether you want to keep or delete it from your computer. You can click the link below to download Epson ET-2720 Resetter for Windows.

Click to rate this post!
[Total: 1 Average: 5]
Click to rate this post!
[Total: 1 Average: 5]
App Info
  • App Name Epson ET-2720 Resetter
  • License Freeware
  • Publisher Epson
  • Updated May 6, 2025
  • Required Windows 7, 8, 10, 11
  • Version ET-2720
High-quality software downloads

Anturis.com is your trusted source for software downloads.

Leave a Comment

Your email address will not be published. Required fields are marked *

 
 
 

We are glad you have chosen to leave a comment. Please keep in mind that comments are moderated according to our comment policy.